An employee in a winter coat taps a proximity card on an access reader next to the glass entrance door of a Canadian office building lobby.
Publié le 16 novembre 2026

Proximity cards can provide convenient workplace access without compromising security when the credential technology, reader installation and access-control procedures are matched to the building’s operational needs. For Canadian commercial property managers, reliable entry depends on more than choosing a card with an adequate nominal read range. Metal door frames, outdoor exposure, employee handling habits and reader compatibility can all affect everyday performance.

The practical objective is to make authorised entry predictable while ensuring that lost, damaged or obsolete credentials cannot remain an uncontrolled security risk. A legacy 125 kHz proximity system may continue to serve a low-risk installation with existing compatible infrastructure, while a site requiring stronger credential authentication may benefit from a properly configured 13.56 MHz solution such as MIFARE DESFire. Neither technology automatically guarantees reliable or secure operation: installation conditions and system configuration remain decisive.

Facility teams should therefore assess each entrance, investigate recurring read failures before replacing equipment, maintain credential records and plan technology changes around the building’s actual security requirements. This approach improves access performance while controlling replacement costs and reducing unnecessary disruption.

What matters most for reliable proximity access

  • Assess reader placement and environmental interference before blaming card quality or replacing equipment.
  • Match credential technology and format to employee behaviour, entrance traffic and the required security level.
  • Maintain physical credentials, investigate failure patterns and deactivate lost or replaced cards in the access database.

Why Do Proximity Cards Fail Near Metal Door Frames?

Proximity cards can become difficult to read when a reader is mounted too close to a metal door frame because conductive metal changes the reader’s electromagnetic environment. At 125 kHz, the resulting reduction in effective read range can make an otherwise functional card appear defective. The underlying issue is often the installation position, not the credential’s manufacturing quality.

Metallic mounting surfaces can affect the reader’s field and reduce the distance at which a credential is detected. Recessed steel studs, decorative steel panels and metal door assemblies are therefore important considerations during installation. Canadian commercial properties frequently use steel-framed and fire-rated door assemblies, making a pre-installation assessment particularly useful.

Two interference patterns require different responses:

  • Permanent interference: Metal is continuously present within the reader’s immediate mounting environment. A reader installed directly against a steel frame may experience consistently reduced performance.
  • Situational interference: A movable metal object, such as a trolley, temporary sign or parked equipment, occasionally changes the environment around the reader. The problem may disappear when the object is moved.

Start with the least disruptive corrective measure. Repositioning the reader slightly away from the frame may restore more consistent detection. If relocation is unnecessary, a surface-mount spacer or non-metallic back box can separate the reader from the metal mounting surface. HID‘s Signo reader documentation specifically identifies metallic mounting surfaces as a factor affecting read range and recommends plastic spacers.

For example, the documented HID Signo models list typical open-air read ranges of 6–10 cm for supported single-technology 125 kHz cards and 4–10 cm for supported single-technology 13.56 MHz cards. These are manufacturer test figures, not guaranteed installation distances. The manufacturer also cautions that credential form factor, technology and environmental conditions can affect actual performance.

Switching to another reader technology, including a compatible 13.56 MHz option, may be considered when installation constraints cannot be resolved through repositioning or spacing. However, the available manufacturer specifications do not establish that 13.56 MHz readers are universally less sensitive to metal. Technology changes should therefore follow an installation assessment rather than an assumption about frequency alone.

Wired relocation becomes more appropriate when the existing mounting position cannot be corrected, the door assembly prevents adequate separation, or the reader must be moved to a more accessible position. A simple re-mount is generally the more proportionate first intervention when the existing cable and mounting arrangement allow it.

The key operational distinction is between a defective card and an unsuitable reader environment. Establishing that distinction first prevents unnecessary credential replacement and creates a more reliable basis for diagnosing intermittent detection elsewhere in the building.

How Can You Troubleshoot Intermittent Proximity Card Detection?

Intermittent proximity card detection is best investigated by separating credential-related failures from reader and environmental problems. Test the same card at a known-good reader, then test a known-good card at the problem reader. Comparing these results, alongside the timing and frequency of failures, helps facility teams identify where investigation should begin instead of replacing components without evidence.

A practical first visit should use a controlled comparison:

  1. Present the suspected card at a reader known to operate correctly.
  2. Present a known-good reference card at the reader experiencing problems.
  3. Repeat the tests and record whether failures follow the card, remain at the reader or occur only under particular conditions.

If the same credential fails at multiple functioning readers, inspect the card and how it is carried. If several known-good credentials fail at one entrance, investigate the reader, mounting conditions, wiring and configuration. If failures occur only at particular times, examine changing environmental conditions and patterns of employee presentation.

Some everyday behaviours can create symptoms that resemble faulty equipment. Cards kept beside smartphones or inside wallets containing RFID-blocking layers may not be presented effectively. Two cards held together can also interfere with reliable identification. Asking employees to remove the intended credential and present it individually helps eliminate these variables.

Physical wear is another possibility. A heavily used entrance may have a reader whose antenna or other internal components have deteriorated. However, a suspected hardware fault should be checked against a reference credential and, where applicable, communication and configuration diagnostics before replacement.

For systems using OSDP, the Security Industry Association recommends testing reference credentials, checking firmware and isolating components in targeted combinations. Its troubleshooting guidance also makes an important distinction: an LED indication or audible beep does not necessarily confirm successful communication between the reader and controller. This is particularly relevant when a credential appears to be detected but the access-control system does not complete the expected operation.

Outdoor installations require an additional environmental check. Moisture ingress, condensation and corrosion are plausible inspection targets when failures appear after rain, temperature changes or prolonged exposure. Look for visible corrosion at terminals, moisture inside the enclosure or fogging beneath the reader face before assuming that electronic components need immediate replacement. These checks are diagnostic precautions rather than proof that moisture caused the failure.

Access-control event logs can add useful context. Repeated attempts followed by denial may indicate a different problem from a single unsuccessful presentation. Compare timestamps, credential identifiers, door locations and recorded access decisions. The Canadian Centre for Cyber Security also identifies physical access logs as a means of monitoring unusual access patterns, although these records are not a substitute for detailed RF diagnostic traces.

Once the cause is isolated, document the affected door, reference credential, firmware or configuration details where relevant, and the observed failure pattern. This creates a defensible maintenance record and helps prevent recurring faults from being misclassified as routine card replacement.

Proximity Cards or Key Fobs for High-Traffic Employee Entrances?

Proximity cards and key fobs can both support convenient contactless entry, but their suitability depends on how employees carry and present them. At high-traffic entrances, the most useful format is the one that allows consistent presentation without creating unnecessary queues, frequent losses or repeated replacement work. Actual handling habits matter more than the apparent convenience of either format in a product catalogue.

A key fob attached to an accessible lanyard may be presented quickly because the employee does not need to remove a badge from a wallet or clip. A card, however, can fit existing identification and badge processes and may be easier to manage where employees already wear visible identification.

Neither format guarantees better read reliability in every situation. A credential carried close to the body, inside a pocket or alongside other contactless cards may be presented differently from one held separately. The reader’s technology, antenna design, mounting location and supported credential format also influence the result.

Durability and loss patterns should be considered separately:

  • Key fobs: Their compact construction can make them practical for everyday pocket use and reduce some of the bending risks associated with cards. However, detachable fittings or lanyard connections may create opportunities for loss.
  • Cards: They integrate naturally with employee badges and existing identification processes, but bending and stress around a punched attachment slot can damage the internal antenna.

The total cost of ownership is therefore not simply the purchase price of each credential. Replacements, administrative re-issuance, enrolment and the time required to deactivate lost credentials all contribute to operational costs. Facility teams should track the number of lost, damaged and replaced cards and fobs over a consistent period before committing to a bulk format change.

Canadian winter conditions introduce another practical variable. Employees may present credentials from coat pockets or through insulated layers, particularly at entrances exposed to cold weather. These habits can affect the presentation distance and consistency. Rather than assuming that a fob or card will solve the issue, assess how employees actually approach the reader and whether the installation encourages direct presentation.

Peak arrival periods should also inform the decision. Observe the entrance during the busiest arrival window and record whether delays arise from locating credentials, presenting them incorrectly, waiting for access decisions or dealing with repeated reads. A format change will not solve a controller or reader communication problem.

A small operational comparison based on real loss and re-issuance records is more useful than assuming that one format is universally superior. The best choice is the one that fits employee behaviour while remaining compatible with the building’s security and identification requirements.

The Everyday Handling Mistakes That Shorten Proximity Card Lifespan?

Proximity cards usually stop working because their internal antenna or card structure has been physically damaged, not because a battery has expired. These credentials are passive and receive the energy needed for communication from the reader. Repeated bending, poorly positioned punch holes, chemical exposure and delamination can therefore shorten their useful service life even when the printed badge still looks acceptable.

The most important failure mechanisms are:

  • Repeated bending: Carrying a card in a back pocket, sitting on it or repeatedly flexing it can fracture the internal antenna. Detection may become inconsistent before the card stops responding completely.
  • Incorrect hole punching: Creating an attachment hole too close to the antenna coil can damage its conductive path. A crack around the punch slot may be an early warning sign.
  • UV and chemical exposure: Prolonged sunlight and unsuitable cleaning chemicals can contribute to surface deterioration or delamination.
  • Washing machine exposure: Laundry cycles can expose credentials to mechanical stress, moisture and detergents, potentially damaging the card structure.
  • Magnetic phone-case clips and accessories: These should be assessed as part of the employee’s storage environment. However, a magnetic accessory should not automatically be identified as the cause of an antenna failure without testing.

Visible damage is not always proportional to functional damage. A card may look relatively intact while a small internal antenna fracture causes intermittent detection. Conversely, surface scratches alone do not establish that the credential has become unusable.

For facility managers, the practical response is to connect observable damage with the employee’s handling habits. A card that has been repeatedly bent should be inspected for cracks and tested against a known-good reader. A damaged punch slot calls for checking whether the antenna has been compromised. A delaminating card should be assessed for structural deterioration rather than treated as a cosmetic issue.

Physical inspection should also form part of reader troubleshooting. If one employee reports intermittent detection, inspect the credential before replacing the reader. If multiple undamaged cards fail at the same entrance, investigate the installation and reader instead.

Employee guidance should focus on specific behaviours: avoid sitting on cards, do not create attachment holes without an approved punching method, keep credentials away from repeated bending and follow the organisation’s cleaning instructions. These targeted instructions are more actionable than a generic request to handle badges carefully.

Replacing damaged credentials is important, but replacement should also include access-right verification and deactivation of the old identifier. This connects everyday card maintenance with the wider lifecycle controls needed to maintain secure entry.

When Should Facility Teams Replace Contactless Access Credentials?

Facility teams should replace contactless access credentials when physical damage affects reliable operation, when a person’s access authorisation changes, or when the credential technology is no longer supported or suitable for the site’s security requirements. These triggers have different operational implications. A damaged card may require immediate replacement, while technology obsolescence normally needs a planned migration and compatibility assessment.

A useful replacement framework distinguishes three categories.

1. Physical end-of-life

Visible cracks, damaged punch slots, delamination and increasing read failures associated with particular cards can justify replacement. However, failure patterns must be checked against reader performance. If multiple credentials begin failing at one door, replacing all the cards may simply transfer the cost without correcting the underlying fault.

2. Access lifecycle events

Lost, stolen or misplaced credentials should be addressed through the access-control system, not just by issuing another physical card. The same applies when an employee leaves, changes roles or no longer needs access to a particular area. The Canadian Centre for Cyber Security’s physical and environmental protection guidance identifies credential issuance, access-list reviews, access logging and removal of invalid credential identifiers as relevant controls.

3. Technology obsolescence

Reader or controller support changes can make an existing credential format unsuitable for future operation. Before purchasing replacements, check whether the current readers support the intended credential technology and whether the controller and credential-management software can enrol and administer it correctly.

A compatibility review should consider:

  • Supported credential frequency and technology, including the specific 125 kHz or 13.56 MHz formats required.
  • Reader model and configuration at every affected entrance.
  • Controller and credential-management software compatibility.
  • Firmware support and relevant communication configuration.
  • Whether existing and replacement credentials can coexist safely during a phased transition.

Mixed-reader environments require particular attention. A replacement card may be readable at one entrance but unsupported at another. The fact that a reader detects a credential does not necessarily mean that the credential can be successfully enrolled, authenticated and authorised throughout the access-control system.

Replacement planning should also reflect the building’s risk profile. A credential used for a restricted area may warrant more frequent review than one used for a low-risk common entrance, but the available Canadian guidance does not prescribe a universal replacement interval. Organisations should define review frequencies according to their security needs and applicable requirements.

Five actions for a controlled credential replacement process

  1. Inspect affected credentials and record visible damage, including cracks, delamination and damaged attachment slots. Deliverable: a documented condition assessment.
  2. Compare failure reports by card and door using the access-control event log. Deliverable: a list of affected credentials and reader locations.
  3. Verify the replacement format against reader, controller and software compatibility. Deliverable: a signed compatibility checklist.
  4. Review the holder’s identity, role and authorised access before issuing the replacement. Deliverable: an updated credential assignment record.
  5. Deactivate the old credential identifier and verify its removal from the access database. Deliverable: a recorded revocation confirmation.

Bulk replacement should follow an evidence-based audit. If read failures are concentrated at a specific entrance rather than associated with individual credentials, investigate reader condition, mounting and configuration first. This avoids purchasing large quantities of cards to compensate for an infrastructure problem.

Replacement is therefore not simply a purchasing decision. It is part of access governance, equipment lifecycle management and security assurance. Outdoor installations add another dimension because weather exposure can affect the reader itself, even when the credential remains in good condition.

Why Do Outdoor Access Readers Fail During Canadian Winters?

Outdoor access readers can fail during Canadian winters because of moisture, condensation, temperature-related component limitations and physical exposure to snow and ice. A reader described as suitable for outdoor use is not automatically appropriate for every Canadian climate or installation. Property managers should verify the manufacturer’s operating temperature, ingress protection and condensation limitations against the actual exposure conditions.

Winter-related problems generally fall into three categories.

Moisture and condensation: Temperature fluctuations can create condensation inside an enclosure when moisture-laden air reaches cooler internal surfaces. Freeze-thaw conditions may aggravate enclosure and sealing problems. Inspection should include gaskets, enclosure joints, drainage arrangements and visible signs of moisture or corrosion.

Temperature-sensitive components: Combined reader-display units or equipment with integrated electronic components may have operating limits that differ from the surrounding building infrastructure. Cold-related symptoms should be compared with the manufacturer’s documented temperature range rather than attributed to winter conditions alone.

Physical damage: Snow-clearing operations, ice removal tools and plough activity can damage exposed readers, posts, cables or enclosures. Reader placement should account for the path of snow-removal equipment and the accumulation of snow around the installation.

Technical specifications provide a starting point. The documented HID Signo reader family specifies an operating temperature range of -35°C to +66°C, operating relative humidity of 0% to 95% non-condensing, and IP65 and UL294 ratings. These values apply to the documented models, not every reader on the market. The humidity specification explicitly excludes condensation, so the rating should not be interpreted as proof that every moisture scenario is covered.

Credential presentation also changes during winter. Employees may hold cards through gloves, present them from coat pockets or approach parking readers from inside vehicles. These conditions can reduce presentation consistency or place the credential farther from the reader than expected. However, the available manufacturer data does not quantify read performance through winter clothing or vehicle interiors. Such cases should be investigated through controlled on-site testing.

Reader placement should make the expected presentation gesture practical. At pedestrian entrances, the reader should be accessible without requiring employees to remove several layers of clothing or repeatedly search through bags. At vehicle gates, the position should allow a safe and consistent presentation without requiring an unsupported reading distance.

Annual pre-winter maintenance is a straightforward way to reduce avoidable disruption. Include the following checks in the facility’s seasonal readiness programme:

  • Inspect enclosure seals and gasket condition.
  • Check drainage openings and ensure they are not obstructed.
  • Look for corrosion, damaged terminals and signs of internal moisture.
  • Verify the equipment’s operating temperature and environmental ratings.
  • Inspect exposed posts, mounting points and cables for physical damage risk from snow-removal operations.
  • Where gated enclosures use heater elements, check their condition and operation according to the manufacturer’s maintenance instructions.

Winter reliability depends on both suitable equipment and appropriate maintenance. Once environmental limitations are addressed, the remaining strategic question is whether the credential technology itself offers the right balance between daily convenience and resistance to unauthorised duplication.

Key considerations before selecting a credential technology

  • Determine whether the site’s existing reader infrastructure supports stronger authentication or requires a planned technology migration.
  • Assess the consequences of unauthorised credential duplication against the security requirements of each access zone.
  • Plan compatibility, enrolment, deactivation and transition controls before introducing a second credential population.

MIFARE DESFire or Legacy Proximity Cards for Office Access?

MIFARE DESFire and legacy proximity cards serve different security requirements. Traditional 125 kHz proximity credentials generally rely on transmitting a static identifier, making them vulnerable to copying when an attacker can reproduce that identifier. MIFARE DESFire operates at 13.56 MHz and supports cryptographic authentication, providing a stronger basis for protecting workplace credentials when the entire access-control system is configured appropriately.

The distinction is not simply a difference in operating frequency. It concerns how the reader establishes the identity and authenticity of a credential.

With a conventional legacy proximity credential, the reader identifies the card through its transmitted identifier. If that identifier is copied onto another compatible credential, a system relying solely on that identifier may not distinguish the copy from the original. This creates a security weakness, particularly where credentials grant access to restricted areas.

MIFARE DESFire offers a different architecture. NXP’s DESFire EV3 documentation identifies several security capabilities:

  • Mutual authentication between the credential and the system.
  • Hardware-based AES cryptography with 128-bit keys.
  • Encryption of data transmitted over the contactless RF interface.
  • Application-level authentication and support for multiple applications.
  • An optional random identifier feature supporting improved privacy.

These capabilities can support stronger authentication than a static-identifier-only approach. However, purchasing DESFire cards does not automatically activate every security feature. Reader compatibility, controller configuration, application design and cryptographic key management must all be addressed.

13.56 MHz

The contactless operating frequency of MIFARE DESFire EV3. NXP documents an operating distance of up to 100 mm, depending on reader power and antenna geometry. This is a conditional technical specification, not a guaranteed workplace read range.

Technical reference: NXP’s MIFARE DESFire EV3 product specifications.

Migration also introduces infrastructure considerations. A building using older 125 kHz readers may need compatible multi-technology readers or reader replacements before DESFire credentials can be deployed. Credential-management software and enrolment procedures may also require changes.

The practical comparison is as follows:

Legacy proximity and MIFARE DESFire comparison
Criterion Legacy proximity MIFARE DESFire
Typical frequency 125 kHz 13.56 MHz
Authentication model Commonly static identifier-based Supports cryptographic mutual authentication
Resistance to credential copying Limited when relying on an identifier alone Stronger when correctly configured and managed
Infrastructure requirements Often compatible with existing legacy readers Requires compatible readers and system configuration
Migration complexity Lower when existing infrastructure is retained Potentially higher, depending on the existing system
Suitable application Sites where existing functionality meets the assessed risk Sites requiring stronger credential authentication

A phased migration creates a transitional security risk. If old and new credentials remain active without clear controls, the building effectively maintains two credential populations. This can increase re-issuance work and leave older credentials valid for longer than intended.

Migration should therefore be prioritised according to security-zone requirements rather than simply progressing floor by floor or department by department. Restricted areas can be addressed first where the risk assessment justifies stronger authentication. Every transition stage should identify which credentials remain valid, which readers support them and when legacy identifiers will be revoked.

For Canadian commercial property managers, tenant requirements and building security policies should also be considered. A landlord-controlled access infrastructure may serve several organisations with different operational requirements. Choosing a technology at the base-building level can reduce the risk of incompatible credential systems being introduced independently by tenants.

The appropriate technology is not necessarily the newest available option. It is the one that provides sufficient protection, works with the existing infrastructure or a justified upgrade plan, and can be administered consistently throughout the building.

Which Card-Based Credentials Best Suit Canadian Commercial Buildings?

The most suitable card-based credential for a Canadian commercial building depends on the required security level, existing reader infrastructure, environmental conditions and employee access habits. Legacy proximity cards can remain practical where the existing system meets an assessed low-risk requirement. MIFARE DESFire is more appropriate where stronger cryptographic authentication is needed and compatible infrastructure can support it. Key fobs and other smart credentials should be selected according to their actual functionality and operational fit.

Credential selection should start with the entrance rather than the product catalogue. A pedestrian lobby, a steel-framed service entrance and an outdoor parking gate present different operational conditions. A format that works well at one door may be inconvenient or unreliable at another.

The following decision grid summarises the main considerations.

Credential selection for Canadian commercial buildings
Credential type Daily convenience Security against copying Operational considerations Migration implications
Legacy 125 kHz proximity card Convenient short-range presentation Limited when based on a static identifier Established badge-based workflows; physical antenna damage remains possible Often retains compatibility with existing legacy readers
Proximity key fob Convenient when attached to an accessible lanyard or keyring Depends on the underlying credential technology Compact format; attachment loss and replacement administration must be considered Depends on the supported reader format
MIFARE DESFire Short-range contactless presentation Supports cryptographic authentication Requires appropriate authentication and key management May require compatible readers and enrolment changes
Other smart credentials Depends on format and reader compatibility Depends on the actual security architecture Capabilities and management requirements vary by technology Must be assessed against the deployed infrastructure

Several considerations should guide the final decision.

First, assess the reader environment. Steel frames, outdoor exposure and unusual mounting conditions can affect detection regardless of the credential’s security architecture. The physical installation must support the intended presentation distance and operating conditions.

Second, evaluate the security requirement. A credential that relies on a static identifier may be insufficient for areas where copying presents an unacceptable risk. Where stronger authentication is necessary, select a technology with appropriate cryptographic capabilities and verify that these are actually enabled throughout the system.

Third, examine employee behaviour. The practical difference between cards and fobs depends on how employees carry them. A visible identification badge may suit a corporate reception environment, while an accessible fob may be more convenient for employees who regularly use a parking or service entrance.

Fourth, calculate the full operational cost. Initial credential prices are only one component. Reader replacement, controller compatibility, enrolment changes, employee training, lost credentials and administrative re-issuance all affect the total migration effort.

Multi-tenant properties need an additional governance layer. Landlords typically manage base-building infrastructure while tenants may manage their own employees and credential assignments. The credential technology should therefore be agreed at the building level, with clear responsibilities for enrolment, access authorisation, replacement and revocation.

During migration, a credential register should identify the technology, associated reader compatibility, holder and access permissions. This makes it easier to manage old and new credentials without leaving obsolete identifiers active unintentionally.

Convenience and security should be evaluated together. A secure credential that employees struggle to present can create queues and encourage poor handling practices. A convenient credential without suitable authentication and lifecycle controls can expose the building to avoidable access risks.

For facility teams, the most effective approach is to maintain an entrance-by-entrance inventory, identify the security requirements of each area, verify reader compatibility and establish a documented replacement and deactivation process. That operational discipline is what allows contactless access to remain convenient without weakening building security. A periodic review of door performance, credential condition and access permissions provides a practical starting point for improving an existing installation or planning its next upgrade.

Frequently Asked Questions About Proximity Card Access
What is the typical reading distance of a proximity card?

Reading distance depends on the credential technology, reader model, antenna configuration and installation environment. For example, the documented HID Signo models specify typical open-air ranges of 6–10 cm for supported single-technology 125 kHz cards and 4–10 cm for supported single-technology 13.56 MHz cards. These figures are not guaranteed distances for installations involving metal surfaces or other environmental interference.

Can a proximity card stop working without visible damage?

Yes. An internal antenna fracture or other structural damage may affect detection before obvious external damage appears. Testing the credential at a known-good reader and comparing its performance with a reference card helps determine whether the card itself is responsible.

Are 13.56 MHz credentials automatically more secure than 125 kHz cards?

No. Frequency alone does not establish credential security. Security depends on the authentication mechanism, cryptographic capabilities, reader compatibility, controller configuration and key management. MIFARE DESFire supports mutual authentication and AES cryptography, but these capabilities must be properly implemented.

Should a building replace all proximity cards when one reader fails?

No. First test a known-good card at the affected reader and the suspected card at another functioning reader. If several credentials fail at the same entrance, investigate the reader, mounting environment, wiring and configuration before ordering replacements.

What should happen to an old credential when a replacement is issued?

The old credential identifier should be deactivated and its removal from the access-control database verified. Issuing a replacement without revoking the previous credential can leave an additional authorised identifier active. The Canadian Centre for Cyber Security recommends removing identifiers associated with lost, stolen or no-longer-authorised credentials from access lists.

Rédigé par Priya Desai, An information curator specializing in physical access control, credential technologies and identity verification for commercial facilities. Organizes technical evidence about electronic locks, access permissions, biometric readers and credential lifecycle procedures into clear comparisons. Enables readers to understand compatibility, security trade-offs, privacy implications and operational constraints before evaluating access control arrangements.